1. The board receiving personnel need to confirm whether the number of boards is consistent with the work order signboard, and whether the boards are neatly placed.

 

2. After closing the board, place the work order and the corresponding board at the first 20PNL on the right of the handrail of the trolley.

 

3. The pre-processing and board placement personnel must send the work order to the post-processing in time when placing samples and small-scale production. In the case of mass production, the work order will be sent to the post-processing after 20 PNL.

 

4. When placing 100PNL boards, the pre-processing board personnel must separate them with substrates, and inform the pre-processing board box personnel and the tin sprayer to distinguish them. For each batch of boards produced, the reworked boards must be confirmed by IPQC in time and reworked in time to prevent the boards from falling behind in batches.

 

5. The pre-processing board personnel will pass the work order to the post-processing after placing the board 20PNL, and the post-processing board receiving personnel will place the work order on the right of the first 20PNL of the corresponding material number on the handrail of the trolley for the non-stamped board. , the stamping board is placed by the stamping staff to the right of the work order clip and the first 20PNL of the handrail of the trolley. And fill in the trolley mark.